Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Autocad 2009

Status
Not open for further replies.

civeng80

Structural
Joined
Dec 21, 2007
Messages
745
Location
AU
Ive been using a trial version of Autocad 2009. Wondering what other users think of it particularly the ribbon ? I must say I dont find it all that worthwhile ! Any comments would be appreciated greatly !
 
I like it. IMO, 2009 is best version so far.

Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 06/08
ctopher's home (updated Apr 30, 2008)
 
it has some very slight improvments over 2008 - but a few bugs too, like if you change anything in the: options/open & save/Object ARX applications settings, it suddenly doesnt recognise commands like matchproperies, view, mtext, justifytext, revcloud etc.. not good!
 
It would seem that the above mentioned bugs are deliberate by acad - demandload system variable disables certain commands, so your best leaving it on.
Now that i've finally solved that mystery, 2009 does offer a few nice touches that 2008 doesnt have, but you need a slightly beefier pc to run it smoothly.
 
I've closed the Ribbon, I find no need for it. My biggest gripe is the time delay every time you execute a command. Other than that I'm pretty happy so far.
 
Thanks all !

In my opinion probably not worth the upgrade from 2004.

Cheers !
 
I also have 2004 and run into problems with files from newer versions of Architectural Desktop. In one case, the layer's dialog box was disabled. It did make me think my next purchase should be a BIM package, like Revit. I hope this fall when things slow down and I can play with Revit a little, I can figure out which direction to go.


Don Phillips
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top