Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AutoCAD 2007 Detail View

Status
Not open for further replies.

haazen

Mechanical
Joined
Jul 26, 2006
Messages
4
Location
CA
Is there any way to reference some thing in the same drawing.

I want to have a detail that is updated when the whole plan is updated.(both are to be on the same drawing sheet)
 
Could you create a viewport of the same area?

"Everybody is ignorant, only on different subjects." — Will Rogers
 
I do it by just drawing the minute detail in the body of the drawing, then create a new layout that just looks at the detail. A couple of times I've needed to put part of the detail on a layer that I turn off for the big picture and turn on for the detailed drawing. It really works well.

David
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top