AutoCAD 2000 BACKS AN HOUR???

[Herny]

I was using ACAD2000 with Win2000 during 9 months. At last weeks, after 5-7 hours session, my drawing "goes back" about an 1-2 hour of operations. No way to recover the last modifications directly. Then I must to set "autosave" about 10min. and recover the backup.
Anybody solve this trouble?
T.Y.I.A.

 

[ybnrml]

I have seen this happen when using the mstretch command from the Express tools.
I have had to stop using this command and the problem has never returned. Try to determine if a specific command is the one causing the undo problem. Good luck!

 

[Herny]

Dear ybnrml:
You are right. I'd seen the bug ocurrs when I use BTRIM, BEXTEND and other commands from Express Tools. Have Autodesk a patch for this troubles? Securely not.
Thank you, man!!!

 

[shadow]

what version of the express tools do you have if you have the latest then check with outodesk cause every so often they update the code when a problem is found so make sure you have the latest if you havent bout or are not on VIP then you more than likely dont have the latest version