Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Auto Parts List with a Drawing Exists Column

Status
Not open for further replies.

Tortuga11

Nuclear
Joined
Feb 15, 2012
Messages
10
Location
US
Maybe somebody has a creative solution to do this but I don't think its possible

We have a TC/NX environment with a master modeling setup. I would like to make a parts list template for a UGPART drawing that aside from showing things like bom#,DI name, DI number, qty and a user entered vendor name and num column also is capable of displaying whether our in-house desighnitem has a UGPART dataset within the Designitem Revision. Some of our designitems don't have drawings and we need a way to differentiate between designitems that have drawings from those that don't. I know we could do this manually by creating a column and putting and x or something in it which is my fall back plan but obviously automatation is the way to go whenever possible. Does anybody have any expieriance with this type of situation or could guide me in the right direction.

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top