Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Australian code AS121 - design software
- Thread starter EngVenier
- Start date
gr2vessels
Mechanical
dbuzz,
Try contact Peter Hill in Melbourne, he and his brother I think developed the original PRESTO and marketed the software for years after the 3rd Addendum of AS 1210 '99. I lost them also, perhaps Peter McGowen might know something. Is AS 1210 board doing something for the update of ed.'99 or it has been abandoned all together?
Cheers,
gr2vessels
Try contact Peter Hill in Melbourne, he and his brother I think developed the original PRESTO and marketed the software for years after the 3rd Addendum of AS 1210 '99. I lost them also, perhaps Peter McGowen might know something. Is AS 1210 board doing something for the update of ed.'99 or it has been abandoned all together?
Cheers,
gr2vessels
gr2vessels
Mechanical
Sorry, apsix,
You are right, up ten points.
Cheers,
gr2vessels
You are right, up ten points.
Cheers,
gr2vessels
vitek
Mechanical
- Jan 11, 2002
- 1
EngVenier
the last version of Presto incorporated only up to ammendment 2. As far as Im aware it was never updated to incorporate ammndt 3. Most design houses have developed in-house software.
The situation may have changed in the last year and a bit though.
the last version of Presto incorporated only up to ammendment 2. As far as Im aware it was never updated to incorporate ammndt 3. Most design houses have developed in-house software.
The situation may have changed in the last year and a bit though.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question