ATLAS COPCO 2101-S7-115R

[apruccoli]

i have a ATLAS COPCO 2101-S7-115R controller and i want to set it up with a allen bradley plc to make it run foward a reverse any help?

 

[Skogsgurra]

Isn't that a Siemens controller?

Gunnar Englund

http://www.gke.org

--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...

 

[apruccoli]

im not sure the way it was explained to me is the atlas copco has a drill type gun and it has a blue green and red wire the blue and red need to touch for it to go foward and the blue and green need to touch first then the red touches them both for it to go in reverse and they want it set up with a plc using timers

 

[jraef]

That already is the controller for the tool, it should be capable of reversing. Try reading the manual.