Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ATI Radeon Chipset and Spec Tree

Status
Not open for further replies.

lightspeed

New member
Joined
Jun 23, 2003
Messages
4
Location
US
I have a compaq evo n1020v and i am having graphics problems with CATIA V5. Initially whilst the specification tree was visable the processing became execessive if i tried to do anything, even rotate the model. I believe i have updated my driver to the latest which has improved the situation somewhat. I can rotate the model fine now with the specification tree up but if i highlight the text in the specification tree the highligting is very slow. The longer the specification text the slower the highlighting. I believe this to be a problem with the radeon graphics chip set / driver as i had the same problem with a radeon graphics card in a desk top. I fixed this by downloading the latest driver from ATI.

Has anyone had similar difficulties and got round them?

Thanks

Mark
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top