Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

At the one-third points

Status
Not open for further replies.
sundy

sundy

Geotechnical
Joined
Oct 22, 2005
Messages
20
Location
CA
CSA S16-2001

19.1.5
For starred angle compression members interconnected at least at the one-third points, Clause 19.1.4 need not apply.

What does the one-third points refer to here?

Thanks in advance.
 
Sort by date Sort by votes
My guess; L/3 and 2L/3 along the length of the angle, (L). Plus the ends.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

EngrRC
  • Question Question
Shear wall lateral system - what is the minimum percentage
Replies
4
Views
5K
KootK
KootK
metzdmichael
  • Locked
  • Question Question
Edge of Slab Deck Bracing Support at Special Moment Frame Connection
Replies
2
Views
659
sandman21
sandman21
AR2_Struc
  • Locked
  • Question Question
Strong wall at the end of a floor beam
Replies
15
Views
722
1.392DL
1.392DL
ArcTangent
  • Locked
  • Question Question
Members not designated as part of the seismic force resisting system
Replies
1
Views
643
HTURKAK
HTURKAK
Iasonasx
  • Locked
  • Question Question
Is there an FAA or other authority that overrides the reduction of Roof Live Load on airports?
Replies
3
Views
717
lexpatrie
lexpatrie

Part and Inventory Search

Sponsor

Back
Top