Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM F 606 What is the Test Duration

Status
Not open for further replies.
bmoorthy

bmoorthy

Mechanical
Joined
May 29, 2003
Messages
457
Location
CA
Can some body give the salient features of the above standard (Such as Test Duration).
 
Sort by date Sort by votes
This specification identifies hardness testing and tension testing for fasteners. The hardness testing is either Brinell, Rockwell, or Vickers, and can range from approximately 30 s to 5 min. Tension testing can range from approximately 5 min to 30 min.

Regards,

Cory

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JoeBobJenkins
  • Question Question
Is there an equivalent to ASTM D-930 and ASTM D1280?
Replies
6
Views
21K
JoeBobJenkins
JoeBobJenkins
mrmalcolm
  • Question Question
Is intergranular corrosion test required for duplex steel
Replies
6
Views
6K
EdStainless
EdStainless
FrancoisY
  • Locked
  • Question Question
ASTM B633 Type & SC rating based off situation
Replies
1
Views
3K
EdStainless
EdStainless
nabeel3
  • Question Question
What type of Corrosion
2
Replies
25
Views
14K
mfgenggear
mfgenggear
J
  • Locked
  • Question Question
When is welded pipe not acceptable?
Replies
14
Views
4K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top