Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM E561

Status
Not open for further replies.
spike33

spike33

Aerospace
Joined
Feb 21, 2009
Messages
1
Location
US
I'm looking to machine specimens for this test. The spec does not show a detailed view of an (MT) specimen. Does anyone have a reference to a more detailed specimen? If not should/could I use the same tolerances and surface requiremens as those of a (CT) specimen or possibly use the specimen req from ASTM E399.

Thanks
 
Status
Not open for further replies.

Similar threads

duongwe
  • Locked
  • Question Question
welding consumable select and preheat for JIS G4051 S45C weld to ASTM A572 Gr.50
Replies
0
Views
307
duongwe
duongwe
Beginner - Inspector
  • Locked
  • Question Question
EEMUA 234 90/10 CU NI ASTM 466 UNS 70610 Vs UNS 7060X
Replies
0
Views
278
Beginner - Inspector
Beginner - Inspector
CREERAAM
  • Locked
  • Question Question
thickness tolerance for ASTM A 234 fabricated elbows & tee
Replies
3
Views
681
david339933
david339933
Villand345
  • Locked
  • Question Question
ASTM G66
Replies
1
Views
99
MintJulep
M
jose0908
  • Locked
  • Question Question
ASTM A234, ASTM A182 and MTR
Replies
4
Views
188
metengr
metengr

Part and Inventory Search

Sponsor

Back
Top