Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM C361 - 03a Low Head Pressure Pipe

Status
Not open for further replies.
CWEngineer

CWEngineer

Civil/Environmental
Joined
Jul 3, 2002
Messages
269
Location
US
I had a few questions regarding this ASTM. Really appreciate your help and suggestions.

1. When do you know when you have a Low-Head Pressure Pipe and a High-Pressure Pipe (i.e, what is the cuttoff value to distinguish between them)?

2. This ASTM provides tables for external loads up to 20 ft. Is there a reference that uses this ASTM as a refernce and has design procedures to design a pipe for greater than 20 ft of external loading?

THANKS
 
Status
Not open for further replies.

Similar threads

MujtabaQA
  • Locked
  • Question Question
Who can explain about Thin-wall pipe as per ASTM standard
Replies
6
Views
2K
EdStainless
EdStainless
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top