Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A53 Type E Grade B or API5L Grade 8

Status
Not open for further replies.
qaengineer1969

qaengineer1969

Mechanical
Joined
Dec 1, 2010
Messages
8
Location
GB
If I was fabricating carbon steel pipe spools what material would be best to use either ASTM A53-Type E Grade B or APISL Grade 8.
What is the advantages and disadvantages between the two.
 
Status
Not open for further replies.

Similar threads

Andrewstructure
  • Locked
  • Question Question
Cast Steel - Johnstown Works Grade SX, .10-.20 C
Replies
0
Views
719
Andrewstructure
Andrewstructure
Mike Mike
  • Locked
  • Question Question
Am I supposed to specify mortar type M, S, N, or O?
Replies
9
Views
3K
phamENG
phamENG
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz

Part and Inventory Search

Sponsor

Back
Top