Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A335 P36 Pipe Equivalent

Status
Not open for further replies.

Cozzz

Industrial
Joined
Dec 3, 2021
Messages
3
Location
TR
Hello all,

Does anybody know which pipe grade can be used for equivalent of ASTM A335 P36?
We need to change the grade with alternative one because of market unavailability.

Main important thing is pipe will work under 400 celcius degree and 250-300 bar.

Equivalent grades can be also in European norms but it should not be 1.6368 grade, because this is not also available at market.

Thanks
 
Suggest that you repost in the "Pipelines, piping and Fluid Mechanic's" forum

You will get more eyes there ....

MJCronin
Sr. Process Engineer
 
Cuz....

"Main important thing is pipe will work under 400 celcius degree and 250-300 bar."

As the high-energy piping design engineer, you are responsible for this .... not a bunch of strangers from the internet

MJCronin
Sr. Process Engineer
 
@mjcronin i was not responsible for piping design, i am only in a position need to submit alternative grade to piping engineer due to required material grade unavailability in the market. Still thanks for your message.
 
You need to go back to the designer; we don't know why it was selected.
It may be strength, weldability, creep, or some other characteristic.
There are many similar grades, but unless you know the constraints you can't make a selection.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top