Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A262 rapid screening test

Status
Not open for further replies.
cv1

cv1

Materials
Jan 23, 2001
11
The rapid screening test suggests an applied voltage of 20V. If the current density is achieved for the sample size does the voltage applied have any significant effect? or will any reasonable voltage less than 20V still achieve an acceptable result?

Any suggestions or thoughts would be appreciated.
 
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
933
Muhammad Ijaz
Muhammad Ijaz
Wickerfields
  • Locked
  • Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
960
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
jzeds
  • Locked
  • Question
ASTM tests performed using hydraulic press
Replies
1
Views
977
TigerGuy
TigerGuy
Rubje
  • Locked
  • Question
ASTM A7, A30, A70
Replies
1
Views
957
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top Bottom