Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A262 rapid screening test

Status
Not open for further replies.
cv1

cv1

Materials
Joined
Jan 23, 2001
Messages
11
Location
AU
The rapid screening test suggests an applied voltage of 20V. If the current density is achieved for the sample size does the voltage applied have any significant effect? or will any reasonable voltage less than 20V still achieve an acceptable result?

Any suggestions or thoughts would be appreciated.
 
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
jzeds
  • Locked
  • Question Question
ASTM tests performed using hydraulic press
Replies
1
Views
1K
TigerGuy
TigerGuy
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top