Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

astm a135 vs astm a53 in fire sprinkler pipe

Status
Not open for further replies.
lizardtoe

lizardtoe

Mechanical
Joined
Oct 15, 2009
Messages
1
Location
US
What are the differences in the two grades of piping. I am specifically interested in corrosion resistance characteristics.

thanks!
 
Sort by date Sort by votes
Corrosion resistance would be roughly the same for bare pipe supplied by both specifications. ASTM A 53 offers galvanized pipe as an option for corrosion protection versus A 135.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
MujtabaQA
  • Locked
  • Question Question
Who can explain about Thin-wall pipe as per ASTM standard
Replies
6
Views
2K
EdStainless
EdStainless
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top