Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A 264 and ASTM A 240

Status
Not open for further replies.
heriberto

heriberto

Mechanical
Joined
Sep 14, 2001
Messages
2
Location
PA
We specify a A 36 thick plate to be clad as per ASTM A 264 and ASTM A 240, Type 316L steel. Would you consider a 316 weld overlay by GMAW process in order to produce the clad plate instead of hot rolling or explosive bonding the stainless steel plate to the structural plate? Is that right? Is it a possible interpretation of the standards mentioned?

Thanks for your answer.
 
Status
Not open for further replies.

Similar threads

jietepipefittings
  • Locked
  • Question Question
SLIP RING RJ 36" CL900 ASTM A240 GR.304/304L
Replies
3
Views
581
LittleInch
LittleInch
Samingme755
  • Locked
  • Question Question
Asme B16.47 series A and B
Replies
1
Views
3K
LittleInch
LittleInch
SimonRuda
  • Locked
  • Question Question
Question ASTM ASME Edition ASTM A312/A312M:2019 and ASME SA-312/SA-312M:Edition 2019 - Compatible
Replies
3
Views
775
david339933
david339933
victor6397
  • Question Question
Plastic Collapse and ratcheting assessment locations
Replies
1
Views
2K
TGS4
TGS4
hugo50ml
  • Locked
  • Question Question
Concerns Regarding ASME Certification and Company Conduct
Replies
0
Views
2K
hugo50ml
hugo50ml

Part and Inventory Search

Sponsor

Back
Top