Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AST located on grade Continious Leak Detection

Status
Not open for further replies.

alanphillips

Mechanical
Joined
Oct 1, 2007
Messages
2
Location
US
The State of Michigan in their amendments to NFPA30/2000, require all AST (field fabricated) on grade tanks to have a continuous leak detection system in play by 2008. Is there any other states requiring this??
 
Virginia has such requirements for new tanks and tanks that receive a new bottom. I beleieve that Florida, Pennsylvania, New york, New Jersey and Alaska have similar rules. Check out their web sites for more info.

Joe Tank
 
Thanks JoeTank for your response. In Michigan we have a choice of two approved methods. Any new method that we use requires approval by our STATE and that method must be third party reviewed and approved by MWGLDE.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top