Jun 15, 2013 #1 kukelyk Industrial Mar 21, 2005 315 I found UF_CAMGEOM_append_items function in the .net reference, but have no idea how to use it.. Help please ---- kukelyk
I found UF_CAMGEOM_append_items function in the .net reference, but have no idea how to use it.. Help please ---- kukelyk
Jun 16, 2013 Thread starter #2 kukelyk Industrial Mar 21, 2005 315 I have the body (as Body), and the workpiece name, I may use other methods.. ---- kukelyk Upvote 0 Downvote
Jun 17, 2013 #3 markrief Industrial Dec 1, 2008 651 In the mach\resource\wizards folder, you might want to look at set_auto_block.vb. There is a Function SetPartGeom. You might also look at UGOPEN\ufd_cam* Mark Rief Product Manager Siemens PLM Upvote 0 Downvote
In the mach\resource\wizards folder, you might want to look at set_auto_block.vb. There is a Function SetPartGeom. You might also look at UGOPEN\ufd_cam* Mark Rief Product Manager Siemens PLM
Jun 18, 2013 Thread starter #4 kukelyk Industrial Mar 21, 2005 315 Thanks Mark, it seems promising. But how can I run *.c macros? ---- kukelyk Upvote 0 Downvote
