harrisiqbal
Mechanical
Is it possible to select a bunch of members in RISA - 3D and mass change their material?
Thanks
Harris Iqbal
Oceaneering International Inc
Thanks
Harris Iqbal
Oceaneering International Inc
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Assign material to all currently selected members
- Thread starter harrisiqbal
- Start date
- Status
JoshPlumSE
Structural
It depends on what version you are running.
If you are running version 9.1 or above, then the Modify Properties dialog allows you to independently change member type, shape, design list, and material. In previous versions these were tied together so that you had to chang them all at once.
If you are running version 9.1 or above, then the Modify Properties dialog allows you to independently change member type, shape, design list, and material. In previous versions these were tied together so that you had to chang them all at once.
- Status
Similar threads