Oct 13, 2004 1 #1 ferro1001 Automotive Joined Aug 11, 2004 Messages 32 Location DE Hi, Does anybody know how to assign mass to a rigid body? Thanks in advance, ferro1001
Oct 19, 2004 #2 gelu Mechanical Joined Apr 26, 2002 Messages 12 Location CA Section manager\create\other\point\edit section. Assign section. I assume you have ABAQUS/CAE. Regards Upvote 0 Downvote
Section manager\create\other\point\edit section. Assign section. I assume you have ABAQUS/CAE. Regards
Nov 18, 2004 #3 charlesbreen Mechanical Joined Nov 18, 2004 Messages 7 Location GB Gelu's right, but you have to assign a reference point to your rigid body first, in the part module, of CAE, assign -> reference point. Charley Upvote 0 Downvote
Gelu's right, but you have to assign a reference point to your rigid body first, in the part module, of CAE, assign -> reference point. Charley
Jan 21, 2005 #4 fra85 Bioengineer Joined Jan 21, 2005 Messages 1 Location IT Does anybody know how to create an interaction between a costrained deformed part and a rigid body? Upvote 0 Downvote