Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASSET INTEGRITY 3
- Thread starter bo7winner
- Start date
Dhurjati Sen
Materials
Dear bo7,
As an Asset Integrity Lead you are expected to be conversant of all the Quality aspects / issues under the project. Typically, this would mean having a sound idea of all the Static Equipment & Piping that are to be constructed.
Some typical questions could be:
1. What do you know about Quality Management System & the Quality Plan? (This pertains to all the quality issues that could come up during the project including basic knowledge of all the codes / standards being followed like ASME, API, Shell DEPs)
2. What do you know about Quality Procedures & Inspection Test Plans?
3. What are the material of construction of various equipment and possible deviations that are allowed?
4. Welding Procedures and Performance Qualification Records pertaining to the project.
5. Electrodes and filler wires and welding processes to be used in the project.
6. What are your experience regarding welding inspection including welders' tests and performances?
7. How do you guarantee quality parameters? (By issuing Inspection Advice Tickets, Non-conformities, etc.)
8. What are your experience regarding test witness? (like witnessing pressure tests)
9. What are the painting and coating procedures and standards?
Hope this helps.
DHURJATI SEN
As an Asset Integrity Lead you are expected to be conversant of all the Quality aspects / issues under the project. Typically, this would mean having a sound idea of all the Static Equipment & Piping that are to be constructed.
Some typical questions could be:
1. What do you know about Quality Management System & the Quality Plan? (This pertains to all the quality issues that could come up during the project including basic knowledge of all the codes / standards being followed like ASME, API, Shell DEPs)
2. What do you know about Quality Procedures & Inspection Test Plans?
3. What are the material of construction of various equipment and possible deviations that are allowed?
4. Welding Procedures and Performance Qualification Records pertaining to the project.
5. Electrodes and filler wires and welding processes to be used in the project.
6. What are your experience regarding welding inspection including welders' tests and performances?
7. How do you guarantee quality parameters? (By issuing Inspection Advice Tickets, Non-conformities, etc.)
8. What are your experience regarding test witness? (like witnessing pressure tests)
9. What are the painting and coating procedures and standards?
Hope this helps.
DHURJATI SEN
-
1
- #3
@bo7winner - if you have to ask this question, then you aren't the right person for the role.
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
-
2
- #4
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
