Does anyone know how to get a part to follow a path with multiple radi? I can make one part tangent to a section on another part but it will only follow that radius when dragging. How can I get the part to follow the path if it has several bends and curves? Can it be done?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Assembly mating?
- Thread starter element94
- Start date
Look in SW Help for Cam Mates. Also, try visiting this site, you can download files and "reverse engineer" some of his things.
[green]"But what... is it good for?"[/green]
Engineer at the Advanced Computing Systems Division of IBM, 1968, commenting on the microchip.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
[green]"But what... is it good for?"[/green]
Engineer at the Advanced Computing Systems Division of IBM, 1968, commenting on the microchip.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
Chance the radii sketches to a single Composite curve.
Regards,
Scott Baugh, CSWP![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")
3DVision Technologies
faq731-376
faq559-716 - SW Fora Users
Regards,
Scott Baugh, CSWP
3DVision Technologies
faq731-376
faq559-716 - SW Fora Users
- Thread starter
- #4
- Status
Similar threads
- Question
- Locked
- Solved
- Locked
- Question
- Locked
- Question