Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Assembly drawings with instances
- Thread starter plectrum1
- Start date
The simple answer is yes. Can you be more specific to give me an idea of what you would like to achieve.
I suspect that you may be attempting the 2d repeat region to cover all assys and part instances. This doesn't really work. You will probably need to spend a fair bit of time creating a lot of simple repeat regions and filtering them. It's a bity of a pain in the butt, it does work though.
If you want to elaborate I will try to help you.
I suspect that you may be attempting the 2d repeat region to cover all assys and part instances. This doesn't really work. You will probably need to spend a fair bit of time creating a lot of simple repeat regions and filtering them. It's a bity of a pain in the butt, it does work though.
If you want to elaborate I will try to help you.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question