Oct 18, 2007 #1 vzar Industrial Joined Oct 18, 2007 Messages 1 Location YU HI, I was thinking of runing the simulation of distillation column in aspen, but since I'm still learning it, can somebody give me directions, do I need aspen dynamics, or aspen plus is enough. thanks!!
HI, I was thinking of runing the simulation of distillation column in aspen, but since I'm still learning it, can somebody give me directions, do I need aspen dynamics, or aspen plus is enough. thanks!!
Oct 18, 2007 #2 coolcando Chemical Joined Mar 3, 2007 Messages 19 Location CA vzar, You need AspenPlus user interface. When u open the UI, select template and appropriate unitset for u. Finish ur flowsheet. There is a N> logo on the menu.Click it and it will walk u thro' all the inputs u need to put in. You will need to input all stream data and column specifications. hope this helps Upvote 0 Downvote
vzar, You need AspenPlus user interface. When u open the UI, select template and appropriate unitset for u. Finish ur flowsheet. There is a N> logo on the menu.Click it and it will walk u thro' all the inputs u need to put in. You will need to input all stream data and column specifications. hope this helps