Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME Y14.5M-1982 # OF DECIMALS IN FEATURE CONTROL FRAME

Status
Not open for further replies.
tootallbob

tootallbob

Mechanical
Joined
Apr 2, 2008
Messages
4
Location
US
We are still using ASME Y14.5M-1982 for our commercial drawings. When using a feature control frame on a inch dimension, does the number of decimals in the F.C.F have to be the same number as in the dimension/tolerance it is attached to?
 
Sort by date Sort by votes
May get a better response in forum1103



KENAT, probably the least qualified checker you'll ever meet...
 
Upvote 0 Downvote
thread1103-213601 Meant to say I've only worked to the 1994 standard.



KENAT, probably the least qualified checker you'll ever meet...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ShlomoB
  • Locked
  • Question Question
Adding the same balloon multiple times in a drawing (ANSI)
Replies
3
Views
3K
ewh
ewh
I_seek_knawledge
  • Locked
  • Question Question
Y14.5 Basic Dimension & feature control frames
Replies
1
Views
292
ewh
ewh
fabeljafla
  • Locked
  • Question Question
API Source Inspector Electrical Equipment (SIEE) help ............
Replies
0
Views
932
fabeljafla
fabeljafla
engr2GW
  • Locked
  • Question Question
ASME B16.5 flange pressure and temperature rating
Replies
2
Views
1K
4T4
4T4
Bohimei
  • Locked
  • Question Question
Question about adequacy of a V-notch weir
Replies
0
Views
219
Bohimei
Bohimei

Part and Inventory Search

Sponsor

Back
Top