Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME Section VIII Carbon Steel

Status
Not open for further replies.
PVG1

PVG1

Mechanical
Joined
Sep 6, 2012
Messages
10
Location
US
Using carbon steel for a Sect. VIII Div 1, pressure vessel. Wondering if the slab number has to be recorded and kept?
 
Sort by date Sort by votes
No, unless it is the only means of traceability to the original heat number.
 
Upvote 0 Downvote
When plate lot testing is a requirement of the SA specification, the heat chemistry and individual plate number(s) tensile tests will also be required.
 
Upvote 0 Downvote
Thanks guys, much appreciated.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

victor6397
  • Question Question
Question about Ratcheting (ASME Sec. VIII Div.2)
Replies
6
Views
14K
victor6397
victor6397
A
  • Locked
  • Question Question
ASME Section VIII Division 2 - Protecion Against Local Failure
Replies
6
Views
5K
antoniol
A
A
  • Locked
  • Question Question
5.4.2. Buckling analysis - Method A - ASME Section VIII Division 2 - negative EigenVaue
Replies
2
Views
2K
antoniol
A
timsch
  • Question Question
Question of scope of ASME BPVC SECTION IX
Replies
1
Views
9K
DekDee
DekDee
YuJie_PV
  • Question Question
some questions regarding the buckling analysis(5.4 of ASME VIII-2)
Replies
3
Views
10K
TGS4
TGS4

Part and Inventory Search

Sponsor

Back
Top