ASME SEC.2 PART D

[sadeghmorsali]

IN ASME SEC.2 PART D THERE IS MANDATORY APP. 1(BASIS FOR ESTABLISHING STRESS VALUES IN TABLES 1A AND 1B) THAT DESCRIBES R_T AND R_Y IN FOLLOWING WAY:
"RATIO OF THE AVERAGE TEMPERATURE DEPENDENT TREND CURVE VALUE OF TENSILE OR YIELD STRENGTH TO THE ROOM TEMPERATURE TENSILE OR YIELD STRENGTH"
I CAN NOT THESE VALUES! WHERE IS THESE DATA OR CURVES?

 

[GD2]

If you are working with Sec VIII Div 1, and ferrous material look up table U for Tensile stress values and Table Y-1 for yield strength.

GDD
Canada

 

[DriveMeNuts]

I HAVEN'T READ YOUR POST BECAUSE READING ALL CAPITALS IS REALLY IRRITATING.

 

[MJCronin]

I APPRECIATE QUESTIONS WITH ALL CAPS, BECAUSE YOU KNOW THAT THE PERSON POSTING WILL NEVER ACKNOWLEDGE ANY HELP FROM OTHERS.

... AND YOU CAN BE SURE THAT THERE WILL NEVER BE A PLEASE OR THANK YOU..... PLEASE AND THANK YOU ARE, AFTER ALL, TERMS OF RESPECT FOR OTHERS

ONCE THEY GET WHAT THEY WANT THEY LEAVE ....

MJCronin
Sr. Process Engineer

 

[Geoff13]

Same question as thread794-482215