Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME PCC-3-200 Risk Bse Inspection 1

Status
Not open for further replies.
LSThill

LSThill

Mechanical
Joined
Oct 10, 2002
Messages
1,120
Location
US
Team Members

PCC-3-2007 will be published on June 30, 2008. The date was pushed back from June 5, but is not expected to be pushed back further.

Regards,
Dan Sharp
ASME Engineering Admin.
3 Park Ave
New York, NY 10016
sharpd@asme.org
212 591 8538


L S THILL
 
Or you could just read API-510 now to see what PCC-3 will say...

jt
 
Status
Not open for further replies.

Similar threads

IdanPV
  • Question Question
Allowable Stress in ASME B31.1 - Table A-3
Replies
0
Views
838
IdanPV
IdanPV
mechengineer
  • Locked
  • Question Question
ASME VIII-1 Appendix 2 and ASME PCC-1 with API 660 table 3
Replies
0
Views
849
mechengineer
mechengineer
Skatemav86
  • Locked
  • Question Question
Flange bolts preload stress: ASME II Part D vs. PCC-1
Replies
4
Views
955
TGS4
TGS4
Khalid Hameed
  • Locked
  • Question Question
ASME B 31.3 and ASME B31.8
Replies
4
Views
2K
Khalid Hameed
Khalid Hameed
JT0202
  • Locked
  • Question Question
ASME QG-106.4
Replies
2
Views
2K
DekDee
DekDee

Part and Inventory Search

Sponsor

Back
Top