Dec 1, 2014 #1 SJBombero Structural Dec 1, 2014 174 Does anyone have experience tweaking RISA to do an ASME NOG-1 Dynamic Seismic Analysis on a bridge crane?
Does anyone have experience tweaking RISA to do an ASME NOG-1 Dynamic Seismic Analysis on a bridge crane?
Dec 4, 2014 #2 JoshPlumSE Structural Aug 15, 2008 10,437 I am certainly not familiar with those provisions. Is it based on a response spectra analysis, by any chance? That would be my guess. Upvote 0 Downvote
I am certainly not familiar with those provisions. Is it based on a response spectra analysis, by any chance? That would be my guess.
Dec 4, 2014 Thread starter #3 SJBombero Structural Dec 1, 2014 174 Response spectra is one of the options for analysis. However what seems beyond the reach of RISA is modeling the wheels sliding on the rail and the vertical acceleration of the hanging load. Upvote 0 Downvote
Response spectra is one of the options for analysis. However what seems beyond the reach of RISA is modeling the wheels sliding on the rail and the vertical acceleration of the hanging load.
Dec 4, 2014 #4 JoshPlumSE Structural Aug 15, 2008 10,437 I'm sorry, I'm just not familiar with the criteria to answer specific questions. So, I can only respond in generalities. In general, if they're asking for a response spectra analysis then the support conditions have to linear. Hence, RISA should be able to do it. Upvote 0 Downvote
I'm sorry, I'm just not familiar with the criteria to answer specific questions. So, I can only respond in generalities. In general, if they're asking for a response spectra analysis then the support conditions have to linear. Hence, RISA should be able to do it.
