Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME MFC-3M

Status
Not open for further replies.
pecan204

pecan204

Mechanical
Joined
Jul 18, 2006
Messages
4
Location
US
Hello,

Can anyone give me an opinion on the straight lengths of pipe required in Table 2 for a natural gas orifice metering run?

Immediately upstream is a filter (not covered by table 2).

I assumed there would be no swirl in the flow coming out of the filter. Thoughts?

The line diameter is 4.0 inch sch 40.

Thanks
Ken
 
Status
Not open for further replies.

Similar threads

DBreyer
  • Question Question
ASME B31.3 302.2.4 Temperature Variation and piping flexibility
Replies
4
Views
5K
KevinNZ
KevinNZ
K
  • Locked
  • Question Question
ASME section IX QW200.4
Replies
3
Views
2K
David3399
D
N
  • Question Question
ASME B16.9 fittings in EN-13480 design code
Replies
7
Views
1K
XL83NL
XL83NL
JARivera1
  • Locked
  • Question Question
ASME B31.3-2016 PWHT Exemption
Replies
6
Views
6K
JARivera1
JARivera1
bks2000
  • Locked
  • Question Question
Jacketed Gaskets and ASME B16.20
Replies
1
Views
1K
akpipelineengr
akpipelineengr

Part and Inventory Search

Sponsor

Back
Top