Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME I Safety Valves

Status
Not open for further replies.
Valving

Valving

Civil/Environmental
Joined
Feb 23, 2011
Messages
83
Location
TR
I am trying to prepare vendor list for asme I safety valves manufacturers.
So far I located Weir, Crosby, Sapag, Leser, Bopp&Reuther, Sempell etc.
Do you have experiences with them?
Would you advice others as well?
 
Sort by date Sort by votes
On what type of system are you installing these valves? Safety valves are rated differently for steam, hot water, or other medium such as air , refrigerants, propane, etc...
 
Upvote 0 Downvote
Thanks these are, fluid : steam and application is like drum & soot blower & steam air heater applications.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

kokerkov
  • Question Question
What is "Free length" of springs in safety relief vavles??
Replies
9
Views
10K
kokerkov
kokerkov
rika kose
  • Locked
  • Question Question
safety valve
Replies
8
Views
4K
LittleInch
LittleInch
A
  • Locked
  • Question Question
Check valves in PSV paths
Replies
4
Views
6K
udyman
udyman
Hansac
  • Locked
  • Question Question
Liquid service for Pilot Safety Valve
Replies
6
Views
6K
gguliye
gguliye
s3492
  • Locked
  • Question Question
Hello team, I am designing safety
Replies
6
Views
433
Latexman
Latexman

Part and Inventory Search

Sponsor

Back
Top