shuhaimi
Petroleum
- Dec 15, 2014
- 1
Hi I'm from Engineering Consultant Oil & Gas.
I would like to know since we are on feed stage to provide pressure vessel Div.2 specification and provide together UDS(User Design Specification) to our client (oil company).
The question is under RPE signiture of the form, what is my understanding should be sign by RPE engineer from client or fabricator side and not from our consultant side.
We are as a consultant not suppose to sign the form because we just give the design parameter but not involve in detail in design to manufacture the equipment/vessel.
I hope to who had same case can share this similar problem and what is the conclusion of this isue.
I would like to know since we are on feed stage to provide pressure vessel Div.2 specification and provide together UDS(User Design Specification) to our client (oil company).
The question is under RPE signiture of the form, what is my understanding should be sign by RPE engineer from client or fabricator side and not from our consultant side.
We are as a consultant not suppose to sign the form because we just give the design parameter but not involve in detail in design to manufacture the equipment/vessel.
I hope to who had same case can share this similar problem and what is the conclusion of this isue.