Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME B31.8 question

Status
Not open for further replies.
carthago

carthago

Mechanical
Jun 13, 2003
145
What are the requirements in B31.8 for API 5L materials , (say GRADE 65 for instance) regarding their use at low temperatures ( minus 40 Celsius)

Certifications ?
Required Charpy tests ?
Minimum values for Charpy ??

Thanks
 
Status
Not open for further replies.

Similar threads

engineer0
  • Question
End Face Dimension - ASME B31.8 831.4.2(j)(3)
Replies
1
Views
2K
akpipelineengr
akpipelineengr
engineer0
  • Question
ASME B31.8 831.4.2(c) vs. 831.4.2(j)(3) - Reinforcement members and Pressurized Sleeves, End face thicknesses & fillet welds
Replies
3
Views
3K
GD2
GD2
jweld81
  • Locked
  • Question
ASME B31.8 Pars. 812 & 841.1.2 Concerning Circum. Butt Welds and HAZs
Replies
5
Views
3K
jweld81
jweld81
B
  • Locked
  • Question
B31.8 Location Design Factor Change
Replies
9
Views
3K
GD2
GD2
IdanPV
  • Question
Bentley Autopipe Question 1
Replies
4
Views
4K
IdanPV
IdanPV

Part and Inventory Search

Sponsor

Back
Top Bottom