Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME B16.5 vs API Classes 1

Status
Not open for further replies.
recoveringEngineer

recoveringEngineer

Mechanical
Sep 17, 2004
17
Are the dimensions/geometries compatable between ASME B16.5 and API Flanged fittings? I need to build a test line, probably 12 inch. I will be using B16.5 fittings.

Donald Blachly, PE
 
Replies continue below

Recommended for you

Sort by date Sort by votes
You may find this link usefull also.




pipingdesigner
pipingdesigners%20logo.gif
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

X
  • Question
B16.5 Max Flange Hydrostatic Test Pressure
Replies
8
Views
6K
TGS4
TGS4
engineer0
  • Question
ASME B31.8 831.4.2(c) vs. 831.4.2(j)(3) - Reinforcement members and Pressurized Sleeves, End face thicknesses & fillet welds
Replies
3
Views
3K
GD2
GD2
anders_1
  • Locked
  • Question
Bolt lengths in ASME B16.5 (2020) 1
Replies
3
Views
406
anders_1
anders_1
Sammule
  • Locked
  • Question
What are the differences between the Flexibility methods of ASME, API 650, WRC-297 (Bijilaard), and Spherical for Puzzle?
Replies
0
Views
869
Sammule
Sammule
K
  • Question
ASME section IX QW200.4
Replies
3
Views
2K
David3399
D

Part and Inventory Search

Sponsor

Back
Top Bottom