Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME B16.5 1974

Status
Not open for further replies.
JPGriffin

JPGriffin

Mechanical
Joined
Dec 1, 2004
Messages
5
Location
US
jte sent data from 1977 edition of B16.5 for A181-1 flanges. Need allowable pressure at 150F and 200F. thanks for the help.

JPG
 
Sort by date Sort by votes
ANSI 16.5 - 1977, Material Group 1.4 (A181-I)

Class 150: 235 psig @ 100 deg. F, 215 psig @ 200 deg. F.
Class 300: 620 psig @ 100 deg. F, 560 psig @ 200 deg. F.

For 150 deg. F. use linear interpolation.

Good Luck,

NozzleTwister
Houston, Texas
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
B16.5 Max Flange Hydrostatic Test Pressure
Replies
8
Views
7K
TGS4
TGS4
anders_1
  • Locked
  • Question Question
Bolt lengths in ASME B16.5 (2020)
Replies
3
Views
574
anders_1
anders_1
DBreyer
  • Question Question
ASME B31.3 302.2.4 Temperature Variation and piping flexibility
Replies
4
Views
4K
KevinNZ
KevinNZ
K
  • Locked
  • Question Question
ASME section IX QW200.4
Replies
3
Views
2K
David3399
D
N
  • Question Question
ASME B16.9 fittings in EN-13480 design code
Replies
7
Views
1K
XL83NL
XL83NL

Part and Inventory Search

Sponsor

Back
Top