Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME B16.11 end wall thickness "G"

Status
Not open for further replies.
torsani

torsani

Mechanical
Joined
Sep 4, 2001
Messages
25
Location
BR
Hi,

Is Min. End Wall thickness "G" from ASME B16.11 table 7 applied only for cap or also for coupling and half coupling?

Torsani
 
Sort by date Sort by votes
Post on the ASME Code Forum as ASME B16.11 is not an ANSI Code,
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

CJonGrey
  • Locked
  • Question Question
TIA-222H Guys
Replies
0
Views
590
CJonGrey
CJonGrey
4T4
  • Locked
  • Question Question
big bore flange dimensions over 60".
Replies
2
Views
903
4T4
4T4
engr2GW
  • Locked
  • Question Question
ASME B16.5 flange pressure and temperature rating
Replies
2
Views
1K
4T4
4T4
MCRodg
  • Locked
  • Question Question
Logic behind ASME 14.5 1.6.2(a). No Zero before decimal point.
Replies
6
Views
2K
looslib
looslib
braham0793
  • Locked
  • Question Question
ANSI 818.2.2 / ASME B18.2.2
Replies
2
Views
388
101Mpa
101Mpa

Part and Inventory Search

Sponsor

Back
Top