ASME A192-F11 1

[enginerding]

Does anyone know the yield stress and ultimate stress of ASME A192-F11 material?

 

[jte]

nerding-

SA-192 (no grade, carbon steel) has a 47 ksi SMTS and 26 ksi SMYS.

Are you sure you didn't mean SA-182 F11 (1.25 Cr 0.5 Mo Si) which has a 60 ksi SMTS and 30 ksi SMYS?

jt

 

[enginerding]

Yes. I'm sorry. It is ASME A182-F11 as called out on a drawing that I was given. Is ASME the same designation as SA? I usually deal with ASTM specs...

 

[jte]

ASME takes an ASTM spec, adds an "S" in front, and publishes the spec in IIA. Most of the time the spec's are identical, sometimes they differ in the details. I don't have the current edition of IIA handy, but in the 1998 edition on page xlii it states that SA-182 / SA-182M is identical except for the clarified heat treatment requirements by the addition of Note 4 to Table 1. You should check the 2007 edition. Most mills will dual certify the plates they produce so chances are you'll receive plate which is considered A-182 / SA-182.

jt