Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Asking for help in BAJA SAE Car

Status
Not open for further replies.
thelostelite

thelostelite

Mechanical
Joined
Jul 30, 2013
Messages
5
Location
EG
Hello,I've joined a racing contest for Off-Road cars , called Baja SAE ( Society of Automotive Engineers)
The car contains tubes that are welded together or attached together by flanges
I am familiar with Abaqus and ANSYS btw
What are the main aspects that we should consider in modeling and simulating a baja sae car ?
[pc]
DSCN1053_sc7gba.jpg
 
Status
Not open for further replies.

Similar threads

A
Abaqus help
Replies
2
Views
8K
ArijitME
A
K
  • Question Question
Trouble Meshing Imported SolidWorks Part in Abaqus – Need Help with Hex or Hex-Dominated Mesh
Replies
2
Views
12K
Simfinite engineering
Simfinite engineering
A
  • Solved
Applying Local Coordinate System for BC in Abaqus
Replies
1
Views
4K
FEA way
FEA way
R
  • Question Question
Zig-Zag Strain Pattern in NSM FRP Pull-Out Simulation (Cohesive Zone Model) – Need Help
Replies
2
Views
9K
Roshaan
R
A
  • Question Question
Need help modeling an elastomeric laminated bearing
Replies
3
Views
5K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top