Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASCE 7-98 & 7-02...

Status
Not open for further replies.

selarose

Structural
Joined
Nov 19, 2005
Messages
6
Location
US
Florida Building Code's COR for wind loads is 7-98 and specifies Table 6-12 for screen enclosures. I currently have 7-02 and the table numbers have changed (no Table 6-12).

Can someone with both 7-98 and 7-02 please tell me what Table 6-12 corresponds to in the 7-02 edition? Thanks.
 
WillisV-

The work is being done in Broward County, and their COR is 2001. I had asked them about the their references to the 2005 code, but the one of the staff engineers assured me the current applicable code is 2001. So, i am using that code.

I also checked with the local building dept in that county (Coral Springs) and they too verified 2001.

Thanks though.
 
Wouldn't the State Building Code override the local?
 
selarose,

responding to your question:

ASCE 7-98 Table 6-12 is the table for Force Coefficients, Cf for Open Signs and Lattice Frameworks.

In ASCE 7-02, the same table appears as Table 6-21. There are no changes from the 98 version.


Regards,


chichuck
 
thanks chichuck.

i actually went back and checked again to see which code was current. low and behold, as of october 1, 2005 the 2004 FBC is now current. I called the county and told them and they "didn't know about it" and would get back to me. Yeah, government.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top