Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASCE 7-22 4.3.4 Interior Walls and Partitions

Status
Not open for further replies.
AValdes

AValdes

Structural
Joined
Feb 19, 2020
Messages
8
Location
MX
So ASCE 7-22 4.3.4 Interior Walls and Partitions requires a minimum horizontal load of 5 psf. That’s clear. But this is Chapter 4: Live Loads. Does this mean that the 5 psf must be combined as Live Load (maximum factor of 1.6)?
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

DG57
  • Question Question
ASCE 7-22 Software
Replies
3
Views
2K
RWW0002
RWW0002
SteelPE
  • Locked
  • Question Question
ASCE 7-22 Windward Drift
Replies
6
Views
5K
DanKile
DanKile
Pratikmokal
  • Question Question
Snow drifts against low roof parapet per ASCE 7-22
Replies
5
Views
5K
ANE91
ANE91
SteelPE
  • Question Question
ASCE 7-16 Wind Loads
Replies
2
Views
6K
DanKile
DanKile
Larryhd2
  • Locked
  • Question Question
ASCE 7-16 vs 7-22... use higher Sds?
Replies
7
Views
3K
Aesur
Aesur

Part and Inventory Search

Sponsor

Back
Top