Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASCE 7-05 Options

Status
Not open for further replies.
RickAllan

RickAllan

Mechanical
Joined
Jul 16, 2008
Messages
1
Location
CA
When I design to ASCE 7-05 are (1)concurrent vertical seismic loads (sec 13.3), (2)Orthogonal Combination Procedure (sec 12.5.4) and (3) redundancy factor (sec 12.5.4) typically optional, only to be used when required by client specs or city/state codes.
 
Sort by date Sort by votes
Not sure what you are trying to determine. I would suggest contacting the local building code official and asking what they require for design.
 
Upvote 0 Downvote
There are not too many provisions which are "optional". Most States don't have the wherewithal to pick and choose specific items for deletion.

Most provisions are triggered by the Seismic Design Category of the structure. The designer may have the option to choose between a simplified or rigorous analysis method, but that is different than opting out.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

g.n
  • Question Question
ASCE 7-16 Figure 30.5-1
Replies
2
Views
8K
g.n
g.n
DG57
  • Question Question
ASCE 7-22 Software
Replies
3
Views
2K
RWW0002
RWW0002
duckhawk
  • Question Question
ASCE 7-16 15.4.4 - Approximating Seismic Period
Replies
11
Views
11K
Celt83
Celt83
Ricyteach
  • Question Question
ASCE 7 wind load for round irrigation tank
Replies
6
Views
2K
Ricyteach
Ricyteach
R
  • Question Question
Chapter 28, ASCE 7, Wind loads at corner
Replies
4
Views
7K
DanKile
DanKile

Part and Inventory Search

Sponsor

Back
Top