MachineryWatch
Mechanical
Anybody care to comment on their experience using the ARTeMIS Operational Modal Analysis system? I'm considering it. Performance? Support? Any feedback would be helpful. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ARTeMIS Modal Software 2
- Thread starter MachineryWatch
- Start date
- Status
-
1
- #2
This is a brand-new application, so I doubt there are many out there.
What I can say about Head Acoustics is this: in my experience with their software and hardware over the past 10 years, their customer support has been very very good, their personnel are very knowledgeable, and their applications have been generally bug-free and intuitive in operation.
That is, right-click on almost anything and the menu that appears will give you all your options.
I only regret that they didn't have a Passby (exterior) noise test module when I was in the market a couple years ago.
- R
What I can say about Head Acoustics is this: in my experience with their software and hardware over the past 10 years, their customer support has been very very good, their personnel are very knowledgeable, and their applications have been generally bug-free and intuitive in operation.
That is, right-click on almost anything and the menu that appears will give you all your options.
I only regret that they didn't have a Passby (exterior) noise test module when I was in the market a couple years ago.
- R
-
1
- #3
As far as I can see the ArtemiS of Head Acoustic doesn't have anything to do with OMA (Operational Modal Analysis), whereas ARTeMIS from Structural Vibration Solutions is a dedicated OMA software package.
I've been using ARTeMIS for a couple of years by now and is quite satisfied with it. We perform measurements with a B&K PULSE system and do the analysis in ARTeMIS Extractor. In my opinion it is very user friendly, and the help files are very instructive. It is hard to find "text books" with practical hints about OMA but the help files actually bring you a long way.
Depending on which version you buy (Pro, Light..) you get a different number of analysis algorithms. In practice it is really instructive to be able to compare the same analysis results from different algorithms.
There are some algorithms included to detect and eliminate the effect of pure tone excitation eg. from rotating machinery. These are, in my experience not quite as "automatic" as one should hope. Always gather as much information about shaft velocities, gear meashes etc. as possible to support the analysis.
I've been using ARTeMIS for a couple of years by now and is quite satisfied with it. We perform measurements with a B&K PULSE system and do the analysis in ARTeMIS Extractor. In my opinion it is very user friendly, and the help files are very instructive. It is hard to find "text books" with practical hints about OMA but the help files actually bring you a long way.
Depending on which version you buy (Pro, Light..) you get a different number of analysis algorithms. In practice it is really instructive to be able to compare the same analysis results from different algorithms.
There are some algorithms included to detect and eliminate the effect of pure tone excitation eg. from rotating machinery. These are, in my experience not quite as "automatic" as one should hope. Always gather as much information about shaft velocities, gear meashes etc. as possible to support the analysis.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
