I have been out of school for 7 years. I graduated with a BSEE from a "top ten" engineering school with a good gpa. I have never worked in design or R&D. I work in compliance engineering. My question is how many of you can understand how a circuit works just by looking at the schematic of a product? In my role, I see many products and have a hard time understanding what is going on. I can "read" a schematic but cannot explain how it works and why certain components are where they are. Is this because I never worked in design or do I just suck at engineering?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Are any of you like me? 4
- Thread starter huda79
- Start date
brandoncdg
Civil/Environmental
That response of magic seems like the proper choice of words.
Civil Development Group, LLC
Los Angeles Civil Engineering specializing in Hillside Grading
Civil Development Group, LLC
Los Angeles Civil Engineering specializing in Hillside Grading
- Status
Similar threads
- Locked
- Question
- Locked
- Question
