Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

arc in CST microwave studio

Status
Not open for further replies.
alaa92

alaa92

Electrical
Joined
Nov 13, 2012
Messages
5
can anyone please tell me how to draw an acr with width in CST microwave studio ?
 
Sort by date Sort by votes
You can make a 3 dimensional object from an arc. If you create an arc, select it then click "Curves->Trace from Curve..." you will get a dialog box which asks for two parameters, thickness and width. Width is in the same plane as the curve and thickness is extruded perpendicular to the surface on which the curve lies.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Alexander Morozov
  • Locked
  • Question Question
On the control of the electromagnetic field in a space. Continuation.
Replies
2
Views
1K
Alexander Morozov
Alexander Morozov
Alexander Morozov
  • Locked
  • Question Question
On the control of the electromagnetic field in space
Replies
0
Views
786
Alexander Morozov
Alexander Morozov
Phaeous
  • Locked
  • Question Question
What sequential phenomena do signals trigger that register, say, accurate sound in a speaker?
Replies
2
Views
760
MacGyverS2000
MacGyverS2000
Alexander Morozov
  • Locked
  • Question Question
On Bragg diffraction in antenna technology
Replies
8
Views
1K
Alexander Morozov
Alexander Morozov
baykus
  • Locked
  • Question Question
How to export CST simulation to PCB
Replies
0
Views
353
baykus
baykus

Part and Inventory Search

Sponsor

Back
Top