Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Aptina Imaging lens

Status
Not open for further replies.

DanielJackMorley

Electrical
Joined
Jun 11, 2010
Messages
20
Location
US
I am new to video design and even newer to optics. Is their a stand alone product that can fit the 6 um x 6 um sensor of a MT9V032 from aptina imaging. It would be great if their is one of the web cam balls that can fit on to the pcb that has motors in it for zoom and motion.
 
Well, the Aptina website tells you that it's a 1/3-in format device, so you need a 1/3-in format compatible lens.

TTFN

FAQ731-376
 
Can you call Aptina and ask them? Maybe their application engineer could answer that question.
 
I have a support ticket created and it takes about a week to get them to talk. If their is a technical support line I have not found it.
 
Aptina is primarily interested in large volume customers. Anything shy of a million units is not that interesting to them.

TTFN

FAQ731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top