Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

approved hangers

Status
Not open for further replies.

coarts

Mechanical
Joined
Dec 15, 2006
Messages
24
Location
US
Does anyone have any experience or advice for bidding a large project with all "isolation hangers". Are there approved hangers for sprinkler pipe how would you facter in the added cost?
 

Isolation would imply VIBRATION isolation. Not necessary for a normally static sprinkler system or even pump.

More than likely the project requires seismic bracing/restraints. If you are not familiar with these I would contact your local rep for TOLCO, VMC, etc. for cost guidance in preparing cost for the materials. As for installation labor well who can really predict that..

In this bid climate if you break even that is a win..


Real world knowledge doesn't fall out of the sky on a parachute, but rather is gained in small increments during moments of panic or curiosity.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top