Appropriate Specification 1

[NPSWindTurbine]

Hello All,
I work for a private wind turbine company designing MW scale turbines. We are looking to design a marine grade turbine. I was wondering what the specification number for corrosion coating protection. I'm assuming this would be for ship building or off shore platforms.

Any help is greatly appreciated.

 

[TVP]

NORSOK M-001 Materials selection
NORSOK M-501 Surface preparation and protective coating

http://www.standard.no/en/sectors/Petroleum/NORSOK-Standard-Categories/M-Material/

DNV-OS-B101 Metallic Materials
DNV-OS-J101 Design of Offshore Wind Turbine Structures
DNV-RP-B101 Corrosion Protection of Floating Production and Storage Units

http://exchange.dnv.com/publishing/Codes/ToC_edition.asp#Offshore_Standards

 

[metengr]

http://onlinepubs.trb.org/onlinepubs/mb/Offshore Wind/Standard.pdf

 

[NPSWindTurbine]

WOW! that was quick... Thank you very much

 

[metengr]

Having been involved with wind turbines over the last few years, you know where to look.