Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Applying Passive Pressure to Walls in ETABS

Status
Not open for further replies.
Struct-007

Struct-007

Structural
Joined
Aug 7, 2020
Messages
32
Location
CA
Is there a way to apply passive soil pressure to the walls in ETABS?
This means that the passive pressure will be activated if the wall movement reaches a certain limit.
Thanks.
 
Status
Not open for further replies.

Similar threads

O
  • Question Question
Cold Form Shear Walls in ETABS
Replies
0
Views
3K
olipax
O
GJoeRMK
  • Question Question
Modeling question in etabs, What Etabs does to a shell element to make it "ribbed" ?
Replies
2
Views
15K
JoshPlumSE
JoshPlumSE
Tygra_1983
  • Locked
  • Question Question
Natural Frequencies in ETABS
Replies
5
Views
2K
GregLocock
GregLocock
Stockton2008
  • Locked
  • Question Question
How to model concrete slabs in Etabs
Replies
1
Views
2K
InnovatorX
InnovatorX
Stockton2008
  • Locked
  • Question Question
How to define ultimate and service load combos in Etabs
Replies
1
Views
2K
Luceid
Luceid

Part and Inventory Search

Sponsor

Back
Top