Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Applying graphics without PhotoWorks 1
- Thread starter MadMango
- Start date
-
1
- #2
MadMango,
I can insert a Tif. & .Bmp into my parts & assemblies, but I can't attach them to a surface. That is where Photoworks comes in and does it's job. At my last job we had Photoworks and it was a real cool program for this type of work.
You might check out he has some really neat programs that he wrote. I don't know if he as one for this or not but it's worth a try. If you find something that works other than Photoworks, post it here (free goood).
Hope that helps,
Cheers, Scott Baugh, CSWP
George Koch Sons,LLC
Evansville, IN 47714
sjb@kochllc.com
I can insert a Tif. & .Bmp into my parts & assemblies, but I can't attach them to a surface. That is where Photoworks comes in and does it's job. At my last job we had Photoworks and it was a real cool program for this type of work.
You might check out he has some really neat programs that he wrote. I don't know if he as one for this or not but it's worth a try. If you find something that works other than Photoworks, post it here (free goood).
Hope that helps,
Cheers, Scott Baugh, CSWP
George Koch Sons,LLC
Evansville, IN 47714
sjb@kochllc.com
- Thread starter
- #3
Thanks for the link. It'll take me awhile to run through all of what is presented there. I used PhotoWorks at my last job too, and it was very nice. I guess I am trying to create a "decal" (if I remember the verbage correctly) except it is hard since I don't have PhotoWorks.
Thanks again.
Thanks again.
- Status
